Infrared Patching Rejuvenator
This product is not in stock in USA. If you'd like a quote on getting it delivered to you, please fill out your information.
Check Availability
Easy-to-use restorative sealer rejuvenates asphalt millings for infrared patching and helps repair surface flaws.
Please call for a shipping quote.
Read more- Infrared pothole patching essential
- Restores old, gray asphalt millings
- Better asphalt milling adhesion
Have questions? We’re here to help!
Infrared Patching Rejuvenator to rejuvenate asphalt
Infrared Patching Rejuvenator is a reinforced or fortified asphalt rejuvenator and sealer. It is designed to restore pavements that have deteriorated past the point at which a straight maltene rejuvenator would be beneficial. The Infrared Patching Rejuvenator penetrates the surface of asphalt pavement, providing lower levels of rejuvenation and fluxing than would pure maltene rejuvenators. However, the product contains some asphaltene content, which allows the emulsion to hold sand and to fill larger voids and cracks.
- Restores and rejuvenates old asphalt and asphalt millings
- Repairs poor surface sealcoating, raveling of aggregate and poor joints/seams
- Ratio for application is 10th of a gallon per sq ft but you can apply a little more to be safe, so that equals 10 sq ft per gallon or 50 sq ft per 5 gallon pail. This is for optimum infrared application.
The Infrared Patching Rejuvenator is diluted 2:1, product to water, and placed by distributor at application rates of 0.4 - 0.9 liters per square meter. In ambient temperatures of 10°C., the Infrared Patching Rejuvenator will break within 20 – 60 minutes of application. Sand is then applied at rates between 2 and 4 kgs. per square meter, drag broomed to ‘even out’ the sand and force it into voids and cracks, then compacted. Generally, a minimum of 40% of the sand adheres to the surface. In urban settings with curb and gutter, the sand can be swept 10 - 14 days after application. Rural areas generally don’t require sweeping as traffic moves the aggregate to the shoulder.
The Infrared Patching Rejuvenator is also very effective in rectifying surface flaws on new asphalt pavements. Areas exhibiting poor surface sealing, raveling of aggregate and poor joints and seams are easily repaired with a Infrared Patching Rejuvenator / sand application. Also, it provides an excellent seal for hot in-place recycled pavements. It will readily penetrate, seal the surface and further restore the binder. This is also used with various infrared patching systems.
The Infrared Patching Rejuvenator can also be utilized as a rejuvenating / bonding / coating product with RAP millings. It is diluted 1:1 with water and either pug mill or blade mixed, placed using a paver or grader, then compacted. The Infrared Patching Rejuvenator is generally utilized with RAP millings contaminated with base aggregate that requires coating and a binder.
Time Performance of the Infrared Patching Rejuvenator
Due to its naphthenic crude base, The Infrared Patching Rejuvenator does not ‘dry out’ and become brittle with time. Its slight natural solvency allows the product to soften and penetrate asphalt pavement, causing the surface to remain flexible and more resilient to fluctuations in temperature. The sand and emulsion combination is kneaded and worked in by traffic, temperature and time to provide a seal in depth, not just a surface film like most asphalt sealers.
The Infrared Patching Rejuvenator prolongs the life of asphalt pavements by shielding the surface and structure from the damaging effects of the sun and rain. By applying the product to pavement before serious structural deterioration has occurred, major reconstruction can be significantly postponed.
Have questions? We’re here to help!
0
5 stars
0% (0)
4 stars
0% (0)
3 stars
0% (0)
2 stars
0% (0)
1 star
0% (0)
Share your thoughts with other customers
Top customer reviews
- Highly recommend.Always responsive, and always able to help me with any technical or business-related issues. Highly recommend.
